Home Sitemap Contact Us


Ancient art blended with modern chemistry of construction.

Description: Eurochem mineral putty is a perfect blend of natural minerals provided by the mother earth. Mineral putty is for application on different types of surfaces to get the smooth finishes.

Uses: Mineral putty can be used to provide smooth surfaces on cement plastered walls, precast concrete slabs, POP surfaces, gypsum boards, wooded boards, veneers, panel roofs and concrete surfaces.

Advantages:

  • Solvent free
  • Easy application
  • Good adhesion to various types of surfaces
  • No hands burning while mixing
  • Economy in usage prepare only as required
  • Less gloss absorption for better finish and more paint coverage.

Preparation: Add up to 40% or less water to get the smooth and consistent paste. Mixing/Kneading can be done by hand or machine.

Method of application: clean the surface to be free from dirt, dust, grease and oil, etc. Apply directly on the surface with spatula or knifing blade, or airless spray as suitable. Allow for drying overnight before sanding. In summer climate dampen the hot walls to avoid rapid shrinkage. There is no need to apply the primer before the application of the mineral putty. After sanding the surface primer is recommended for better coverage of the paint.

Coverage: approx 200sft – 500sft depending on the surface and the applicator these are just indicative figures.

Health & safety instructions: Avoid contact with eyes or inhalation & remove person to fresh air, irrigate the affected area with clean water at first instance & call for medical attention. Technical services are available for assistance on any specific use & application.

 

Products
Roof Cement
Mineral Putty
Everplast

Construction Solutions
Home | About Us | Services | Products | Sitemap | Contact Us
   All rights reserved - 2008 © Eurochem Inc. Design & Hosted by: Softwood Hosting